I've 2 RX 6700 XT. It's a dual GPU setup.
1st one gets hot like hell because of the hot air it takes from the 2nd and the 2nd still runs a bit too hot.
The 1st one becomes so hot that i can't run the project since it goes in thermal throttling.
/ 
Reply
Quote
I've 2 RX 6700 XT. It's a dual GPU setup.
1st one gets hot like hell because of the hot air it takes from the 2nd and the 2nd still runs a bit too hot.
The 1st one becomes so hot that i can't run the project since it goes in thermal throttling.
Bigger MB with more gpu slots so you can spread them out a bit? The other is to swap the back plates of the gpu's so you can use water cooling.
/ Reply
Quote
I've 2 RX 6700 XT. It's a dual GPU setup.
1st one gets hot like hell because of the hot air it takes from the 2nd and the 2nd still runs a bit too hot.
The 1st one becomes so hot that i can't run the project since it goes in thermal throttling.
Bigger MB with more gpu slots so you can spread them out a bit? The other is to swap the back plates of the gpu's so you can use water cooling.
ps I asked a guy in another group if he'd give you a better answer as he is FAR more experienced in that type of thing than I am, he may ore may not reply but either way give him a couple of days.
mikey
/ Reply
Quote
Thank you. Any help is welcome.
Now i was thinking about undervolt.
Is it ok for BOINC projects?
/ Reply
Quote
Volunteer developer
Volunteer tester
Send message
Joined: 29 Nov 14
Posts: 83
Credit: 367,636,322
RAC: 56,641
You can use a PCI-E extender, so that the GPU have "more air" between them.
/ Reply
Quote
Thank you. Any help is welcome.
Now i was thinking about undervolt.
Is it ok for BOINC projects?
Yes but you could lose some productivity, YES for some people it's worth it anyway especially for those who have very high electricity rates.
/ Reply
Quote
Let's say there's no space in the case. I can't move or add anything. I did some math now and sadly there's no space for a liquid cooled solution.
Seems that software is everything i can change.
No problem for the productivity loss since the alternative is not running the project. Especially if less productivity also means less electricity and so expenses.
I think i found a solution for now. -6% power. Maybe in summer i'll also add a -10% voltage.
Thank you guys.
/ Reply
Quote
Let's say there's no space in the case. I can't move or add anything. I did some math now and sadly there's no space for a liquid cooled solution.
Seems that software is everything i can change.
No problem for the productivity loss since the alternative is not running the project. Especially if less productivity also means less electricity and so expenses.
I think i found a solution for now. -6% power. Maybe in summer i'll also add a -10% voltage.
Thank you guys.
Lots of times you can find new/used cases pretty cheaply if you aren't pushed for time, which you aren't, so if you have the time and know how you can swap things over to a new case giving you the room you need.
/ Reply
Quote