The 7 minutes I said was from Boinc, which seems to race ahead with the % complete. In 15 minutes according to stderr.txt, it will be complete. We'll see if it validates. Or perhaps you can run that same task on a known good card of your own. I'd hate to think it's giving tasks back which validate but are wrong. since it's generating no heat and has 0% usage in MSI Afterburner, it's definitely not doing calculations. And there's no CPU usage for that task either (in Boinc or Windows Task Manager).
/ 
Reply
Quote
rebirtherVolunteer moderator
Project administrator
Project developer
Project tester
Project scientist
Send message
Joined: 2 Jan 13
Posts: 7415
Credit: 42,730,867
RAC: 0
The 7 minutes I said was from Boinc, which seems to race ahead with the % complete. In 15 minutes according to stderr.txt, it will be complete. We'll see if it validates. Or perhaps you can run that same task on a known good card of your own. I'd hate to think it's giving tasks back which validate but are wrong.
I dont have a good card. A standalone test is the best option to test both cards and track down the issue.
/ Reply
Quote
Can you make them both run the same task?The 7 minutes I said was from Boinc, which seems to race ahead with the % complete. In 15 minutes according to stderr.txt, it will be complete. We'll see if it validates. Or perhaps you can run that same task on a known good card of your own. I'd hate to think it's giving tasks back which validate but are wrong.
I dont have a good card. A standalone test is the best option to test both cards and track down the issue.
/ Reply
Quote
rebirtherVolunteer moderator
Project administrator
Project developer
Project tester
Project scientist
Send message
Joined: 2 Jan 13
Posts: 7415
Credit: 42,730,867
RAC: 0
Can you make them both run the same task?The 7 minutes I said was from Boinc, which seems to race ahead with the % complete. In 15 minutes according to stderr.txt, it will be complete. We'll see if it validates. Or perhaps you can run that same task on a known good card of your own. I'd hate to think it's giving tasks back which validate but are wrong.
I dont have a good card. A standalone test is the best option to test both cards and track down the issue.
yes but not recommended. The GPU use 99% and CPU is nearly unused. Only a test can help.
/ Reply
Quote
Can you make them both run the same task?The 7 minutes I said was from Boinc, which seems to race ahead with the % complete. In 15 minutes according to stderr.txt, it will be complete. We'll see if it validates. Or perhaps you can run that same task on a known good card of your own. I'd hate to think it's giving tasks back which validate but are wrong.
I dont have a good card. A standalone test is the best option to test both cards and track down the issue.
yes but not recommended. The GPU use 99% and CPU is nearly unused. Only a test can help.
I don't understand what you mean. I wanted to run the same task on both GPUs at once. If the dodgy one gives a different result, there's something up.
This is the finished task, which the server claims passed, but it can't have done if it didn't do calculations: https://srbase.my-firewall.org/sr5/result.php?resultid=141051715
Let me know how to run this test.
/ Reply
Quote
This could be a severe problem if there's "valid" tasks coming back which aren't. If this was happening before this update, on any machines with more than one card, can you track down suspect results and re-run them?
/ Reply
Quote
rebirtherVolunteer moderator
Project administrator
Project developer
Project tester
Project scientist
Send message
Joined: 2 Jan 13
Posts: 7415
Credit: 42,730,867
RAC: 0
This could be a severe problem if there's "valid" tasks coming back which aren't. If this was happening before this update, on any machines with more than one card, can you track down suspect results and re-run them?
The result was good.
no factor for M590297503 from 2^74 to 2^75 [mfakto 0.15pre7-MGW cl_barrett15_82_gs_2]
tf(): total time spent: 1h 6m 5.398s (141.22 GHz-days / day)
ERROR: get_next_assignment(): no valid assignment found in "worktodo.txt"
2024-02-04 11:04:38 (8628): mfakto.exe exited; CPU time 10.062500
2024-02-04 11:04:38 (8628): called boinc_finish(0)
/ Reply
Quote
rebirtherVolunteer moderator
Project administrator
Project developer
Project tester
Project scientist
Send message
Joined: 2 Jan 13
Posts: 7415
Credit: 42,730,867
RAC: 0
Can you make them both run the same task?The 7 minutes I said was from Boinc, which seems to race ahead with the % complete. In 15 minutes according to stderr.txt, it will be complete. We'll see if it validates. Or perhaps you can run that same task on a known good card of your own. I'd hate to think it's giving tasks back which validate but are wrong.
I dont have a good card. A standalone test is the best option to test both cards and track down the issue.
yes but not recommended. The GPU use 99% and CPU is nearly unused. Only a test can help.
I don't understand what you mean. I wanted to run the same task on both GPUs at once. If the dodgy one gives a different result, there's something up.
This is the finished task, which the server claims passed, but it can't have done if it didn't do calculations: https://srbase.my-firewall.org/sr5/result.php?resultid=141051715
Let me know how to run this test.
I will create a test later today.
/ Reply
Quote
This could be a severe problem if there's "valid" tasks coming back which aren't. If this was happening before this update, on any machines with more than one card, can you track down suspect results and re-run them?
The result was good.
no factor for M590297503 from 2^74 to 2^75 [mfakto 0.15pre7-MGW cl_barrett15_82_gs_2]
tf(): total time spent: 1h 6m 5.398s (141.22 GHz-days / day)
ERROR: get_next_assignment(): no valid assignment found in "worktodo.txt"
2024-02-04 11:04:38 (8628): mfakto.exe exited; CPU time 10.062500
2024-02-04 11:04:38 (8628): called boinc_finish(0)
It can't have been if the card was idle. It's claiming it didn't find a factor, but it could have been sat doing nothing and lying.
/ Reply
Quote
I also have the same problem with my 2 Radeon RX 7900 GRE, and my Radeon PRO Duo (On another config)
/ Reply
Quote
I've figured it out.
They're both running on the first card. If I pause the one alledgedly on the second card, the memory usage on the first card drops.
/ Reply
Quote
rebirtherVolunteer moderator
Project administrator
Project developer
Project tester
Project scientist
Send message
Joined: 2 Jan 13
Posts: 7415
Credit: 42,730,867
RAC: 0
wrapper test - standalone-windows (AMD only)
1. download zip-file
2. extract somewhere outside BOINC
3. run each wrapper file wrapper_26018_windows_x86_64.exe at the same time, in this case its for device 0 and 1
4. check the GPU usage on each card
If you want to rerun a test you need to recopy worktodo.txt because it will be deleted after a test is done
/ Reply
Quote
I opened the file twice together, it works like under BOINC: GPU0 is at 100% and GPU1 is at 0
/ Reply
Quote
rebirtherVolunteer moderator
Project administrator
Project developer
Project tester
Project scientist
Send message
Joined: 2 Jan 13
Posts: 7415
Credit: 42,730,867
RAC: 0
I opened the file twice together, it works like under BOINC: GPU0 is at 100% and GPU1 is at 0
hmm, any output. I have updated the zip file due a change, whats the input of job.xml?
/ Reply
Quote
<job_desc>
<task>
<application>mfakto.exe</application>
<command_line>-d 1</command_line>
</task>
<unzip_input>
<zipfilename>mfakto-win-v7.zip</zipfilename>
</unzip_input>
</job_desc>
/ Reply
Quote
rebirtherVolunteer moderator
Project administrator
Project developer
Project tester
Project scientist
Send message
Joined: 2 Jan 13
Posts: 7415
Credit: 42,730,867
RAC: 0
this was wrong, was changed in the new zipfile from -d 1 to --device 1, the same for --device 0
/ Reply
Quote
When I put --device 0 and --device 1 in GPU1 and GPU2 respectively, it doesn't open.
/ Reply
Quote
In my opinion, on BOINC, the 2nd GPU works for 2 WU. Your software does not seem to entrust a WU to 2 GPUs, but to entrust 2 WUs to a GPU.
/ Reply
Quote
rebirtherVolunteer moderator
Project administrator
Project developer
Project tester
Project scientist
Send message
Joined: 2 Jan 13
Posts: 7415
Credit: 42,730,867
RAC: 0
When I put --device 0 and --device 1 in GPU1 and GPU2 respectively, it doesn't open.
Whats the content of job.xml now?
/ Reply
Quote
<job_desc>
<task>
<application>mfakto.exe</application>
<command_line>--device 0</command_line>
</task>
<unzip_input>
<zipfilename>mfakto-win-v7.zip</zipfilename>
</unzip_input>
</job_desc>
/ Reply
Quote